Registered

Link Me

About Me

My photo
I'm divorced, and have no children. I live in New England (Vermont). My favorite season is Autumn and holiday is Halloween. I've been PSPing since 2001, tutorial writing since 2004 and tubing since 2009. I gave designing scrapkits a try in 2012 but didn't get a feel for it. I have been writing psp scripts since 2012 and have been doing artwork and making them as tubes to sell since October of this year (2013). I also CT for several designers and a store. I tube artwork for two stores. I enjoy my PSP time almost as much as my offline time sketching.

I CT For






Forums



Powered by Blogger.
Thursday, October 31, 2013

Very Merry Christmas

This tutorial was written on October 31, 2013
Any similarity to any other tutorial is purely coincidental


PSPX5 (but any version should work)
Tube by Ty Wilson at Artistic Dreams Imaging
FTU kit "Christmas Tweet" by Gimptastic Tuts
This Gradient HERE (place in your gradient folder)


**IL = In layer palette




New Image 600x250
Open Paper7
Copy - Close
Paste As New Layer
Open tube
Copy and minimize
Paste as new Layer on canvas
Add dropshadow
Open branch
Resize 45%
Copy - Close
Paste As New Layer
Mirror
Position top right corner of canvas
Add dropshadow
Crop Merged Opaque
Select All
Set Foreground cg-xmas-3 gradient
Change angle to 45
New Raster Layer
Flood Fill
Contract selection 5
Delete
Merge Visible
Add Copyright and Lic #
Merge Visible
Add name desired and save as .png


AVATAR:
Duplicate banner
Using crop tool set at 150x150
position selection in desired spot
Crop
Select all
Flood fill gradient
Contract selection 3
Delete
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

Sunday, October 20, 2013

Boo Woo Hoo

This tutorial was written on October 20, 2013
Any similarity to any other tutorial is purely coincidental



PSPX2 (any version should work)
PTU kit "Boo Berry" by Thrifty Scraps by Gina
Tube by Elias Chatzoudis
Mask of choice

**IL = In layer palette




New image 550x550 Transparent
Open Paper07
Copy - Close
Paste as new layer
Apply mask of choice
Merge group
Open frame04
Copy - Close
Paste as new layer
Resize 70%
Using magic wand click in center of frame
Expand selection 3
Open paper04
Copy - Close
Paste as new layer
Invert selection - Delete - Select none
IL arrange Raster 3 below Raster 2
select Raster 2 layer
Open tube
Copy - Close
Paste as new layer
Add dropshadow

Open, copy/paste, resize and add dropshadow to the following elements **Arrange as desired**

Bracket01
Cauldron
Bat01
Pumpkin01
Spider01
Tree01

Merge Visible
Add Copyright & Lic#
Merge Visible
Add name desired
Save as .png

Friday, October 18, 2013

Elegance

This tutorial was written on October 18, 2013
Any similarity to any other tutorial is purely coincidental

**IL = In layer palette
Open template
SHIFT+D
Close original template layer
IL Delete info DELETE ME layer
IL select L back blk sq layer
Select all - Float - Defloat
Open Paper3
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand Selection 3
New Raster Layer
Floodfill #FFFFFF
Select None
Add Noise (82% Gaussian)
IL arrange Raster 2 below Raster 1
Delete original template layer
IL select R back blk sq layer
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand Selection 3
New Raster Layer
Floodfill #FFFFFF
Select None
Add Noise (same settings used previously)
IL arrange Raster 4 below Raster 3
Delete original template layer
IL select white square layer
Select All - Float - Defloat
New Raster Layer
Floodfill #478fbf
Effects - Blinds (Width 4, Opacity 59, Color #FFFFFF, Horizontal checked)
Select None
IL Delete original template layer
IL select purple oval layer
Select All - Float - Defloat
Open paper8
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand Selection 3
New Raster layer
Flood Fill #FFFFFF
Select None
Add Noise (same settings used previously)
IL arrange Raster 7 below Raster 6
Delete original template layer
IL select black circle layer
Select All - Float - Defloat
Open Paper11
Copy - Close
Paste As New Layer
Invert selection - Delete - Invert Selection
Expand Selection 3
New Raster Layer
Flood Fill #478fbf
Select None
Add Noise (same settings used previously)
IL arrange Raster 9 below Raster 8
Delete original template layer
IL select black square layer
Select All - Float - Defloat
Open Paper2
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
IL delete original template layer
IL select frame layer
Adjust - Hue and Saturation - Colorize (Hue: 0 / Saturation: 0)
Open tube
Copy - Close
Paste As New Layer
Resize 70%
Position so bottom of tube is even with the inside bottom edge of square
Add dropshadow
Open the following items (copy/paste, Resize, Add dropshadow, arrange as desired)
Element8
Element10
Element31
Element30
Element6
Element38
Merge Visible
Resize 550x475 all layers checked
Resize 95% all layers UNCHECKED
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

Wednesday, October 16, 2013

Brew Time

This tutorial was written on October 16, 2013
Any similarity to any other tutorial is purely coincidental.

**IL = In layer palette
New image 550x550 Transparent
Open Paper03
Copy - Close
Paste as new layer
Apply mask
Merge group
Open Frame03
Copy - Close
Paste as new layer
Resize 70%
Using magic wand click in center of frame
Expand selection 3
Open Paper06
Copy - Close
Paste as new layer
Invert selection - Delete - invert selection
Open tube
Copy - Close
Paste as new layer
Resize 70%
Invert selection
Erase bottom of tube
Select none
Add dropshadow
Merge down
Open Crows
Copy - Close
IL select Group-Raster2
Paste as new layer
Resize 70%
Arrange top of frame (See my tag)
IL select Raster 3
Open Lights
Copy - Close
Paste as new layer
Resize 35%
Free Rotate 33 left
Position bottom right corner of frame
Add dropshadow
Open Hat
Copy - Close
Paste as new layer
Resize 45%
Postion bottom right corner of frame
Add dropshadow
Open FrogPotion
Copy - Close
Paste as new layer
Resize 35%
Position left side of witch hat
Add dropshadow
Open BatPotion
Copy - Close
Paste as new layer
Resize 25%
Position left side of FrogPotion bottle
Add dropshadow
Open BloodyEye
Copy - Close
Paste as new layer
Resize 15%
Position right side of FrogPotion bottle
Add dropshadow
Open VoodooDoll
Copy - Close
Paste as new layer
Flip Horizontal
Resize 25%
Position left side of BatPotion bottle
Add dropshadow
Merge Visible
Add Copyright & Lic #
Merge visible
Add name desired
Save as .png

Monday, October 14, 2013

Witchy

This tutorial was written on October 14, 2013
Any similarity to any other tutorial is purely coincidental.
Tube by Ropin Pushay at Artistic Dreams Imaging
FTU kit "Bewitched" by Kittz Kreationz
Mask of choice
New image 550x550 Transparent
Open P2
Copy - Close
Paste as new layer
Apply mask
merge group
Open B-17
Copy - close
Paste as a new layer
Resize 60%
Add dropshadow
Open tube
Copy - Close
Paste as new layer
Resize 70%
Add dropshadow
Open the following elements (Copy/paste as new layer, Resize, position as desired, add dropshadow):
B-20
B-26
B-22
B-7
B-21
Merge visible
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

Sunday, October 13, 2013

Just A Lil Steamy

This tutorial was written on October 13, 2013
Any similarity to any other tutorial is purely coincidental

  • PSPX5 (any version should work)
  • PTU scrapkit "Slightly Steampunk" by Bookworm Dezines
  • Tube by Verymany at PFD
  • Mask of choice
*Plugins*

  • Penta.com - Color Dot
  • Xero - Radiance
New image 550x550 Transparent
Open Paper1
Copy - Close
Paste as new layer
Apply mask
Merge group
Open Element 43
Select top half of frame along seam
Copy and close
Paste as new layer
Resize 80% x2
Center frame on canvas
Using magic wand and holding SHIFT click in each frame center
Expand selection 3
Open Paper2
Copy - Close
Paste as new layer
Invert selection - Delete - Invert selection
Open tube
Copy - Close
Paste As new layer
Position as desired in first frame
Invert selection - Delete - invert selection
Using eraser clear away any tube in the second/third frames
Paste as new layer
position as desired in second frame
Invert selection - Delete - Invert selection
Using eraser clear away any tube in the first/third frames
Paste as new layer
position as desired in second frame
Invert selection - Delete - Invert selection
Using eraser clear away any tube in first/second frames
Merge 3 tube layers together
Select None
Add minor dropshadow
Merge down
IL arrange Raster 3 below Raster 2
Duplicate Raster 3
On bottom layer:
Blur - Gaussian Blur 3
Apply Xero - Radiance using these settings:
On top layer:
Change blend mode to screen
Change opacity to 51%
Apply Penta - Color Dot using these settings:
In layer select Raster 2
Open Element6
Copy - Close
Paste as new layer
Resize 45%
Position bottom right corner of frame
Add dropshadow
Open Element47
Copy - Close
Paste as new layer
IL arrange sparkle layer below Raster 3
IL select Raster 4
Open Element 38
Copy - Close
Paste as new layer
Resize 30%
Position top left corner of frame
Add dropshadow
Open Element 18
Copy - Close
Paste As New Layer
Resize 30%
Free rotate 33.00 Right
Add dropshadow
Position over flower
Open Element16
Copy - Close
Paste as new layer
Resize 30%
Add dropshadow
Position left side of magnifying glass
Merge Visible
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

Thursday, October 10, 2013

Autumn Friend

This tutorial was written on October 10, 2013
Any similarity to any other tutorial is purely coincidental.

New Image 550x550 Transparent
Open paper 9
Copy and close
Paste as new layer
Resize 550x550
Apply Mask
Merge group
Open Leafscratter 02
Copy Resize 45%/45%/70%
Position bottom of mask
Add dropshadow
Open tube
Copy and close
Paste as new Layer
Resize 50%
Add dropshadow
Open the following elements, resize, copy/paste, arrange as desired and add dropshadow to each:
Leaves03
Mesh
Bird
Acorn01
Leaf02
Leaf03
Ribbon03
Vine
Squirrel
Merge Visible
Add copyright and Lic #
Merge Visible
Add name desired
Save as .png

 

Under My Spell

This tutorial was written on October 10, 2013
Any similarity to any other tutorial is purely coincidental.
PSPX5 (any version should work)
Scrapkit "Scary Business" by Rissas Designs
Tube by Robert Alvarado from MPT
Template 357 by Millies PSP Madness
**IL = In Layer Palette**
Open template and duplicate
Close original template
Delete credits layer
IL select 1
Select all - float - defloat
Open paper 5
copy - Close
Paste as new layer
Invert selection - Delete - Invert selection
Expand selection 3
New raster layer
Flood fill #000000
Add Noise - Gaussian 85%
Select None
IL arrange Raster 2 below Raster 1
Delete original template layer
Select 2 layer
Select All - Float - defloat
Paste as new layer
invert selection - delete - invert selection
Expand selection 3
New Raster Layer
Flood fill #000000
Add noise (same settings used previously)
Select None
IL arrange Raster 4 below Raster 3
Delete original template layer
Select 3 layer
Select all - Float - Defloat
Open paper 4
Copy and close
Paste as new layer
Invert selection - delete - invert selection
Expand selection 3
New raster layer
Flood fill #000000
Add noise (same settings used previously)
Select None
IL arrange Raster 6 below Raster 5
Delete original template layer
IL select 4 layer
Select All - Float - Defloat
Paste as new layer
Invert selection - delete - invert selection
Expand selection 3
New raster layer
Flood fill #000000
Add noise (same settings used previously)
Select None
IL arrange Raster 8 below Raster 7
Delete original template layer
IL select 5 layer
Select all - float - defloat
Open paper 6
Copy and close
Paste as new layer
Invert selection - delete - Invert selection
Expand selection 3
New raster layer
Flood fill #000000
Select None
Add Noise (same settings used previously)
IL arrange Raster 10 below Raster 9
Delete original template layer
IL select 7 layer
Select all - Float - Defloat
Open paper 3
copy and close
Paste as new layer
Invert selection - delete - invert selection
Expand selection 3
New raster layer
Flood fill #000000
Add noise (same settings used previously)
IL arrange Raster 14 below Raster 13
Select none
Delete original template layer
IL select 8 layer
Select all - float - defloat
New Raster layer
Flood Fill #000000
Select None
Add Noise (same settings used previously)
Delete original template layer
IL select 9 layer
Open tube
Copy and close
Paste as new layer
Add dropshadow
Open, resize, copy/close and paste as new layer the following elements. Add dropshadows and arrange as desired:
Pumpkin1
Bat
Ghosts
Lips
Sign
WitchyCat
IL select 10 layer (wordart)
Give a black gradient glow using EC4000 or you can select all - float defloat - exapnd 2 - New Raster Layer
Flood fill Black - Select none
Merge Visible
Add copyright and Lic #
Merge Visible
Add name desired
Merge Visible
Save as .png

Monday, October 7, 2013

Hocus Pocus

This tutorial was written October 7, 2013
Any similarity to other tutorials is purely coincidental
  • PSP12 (any version should work)
  • Tube by Becca Moore at ADI
  • FTU scrapkit "Trick or Treat" by Kittz Kreationz
  • Mask of choice

New canvas 550x550 Transparent
Open Paper 9, copy and close
Paste as new layer
Apply mask
Merge group
Open Frame 3, copy and close
Paste as new layer
Open tube, copy and close
Paste as new layer
resize 60%
Add dropshadow
In layers position below frame
Select top half of tube with the selection tool
Promote selection
Select none
On frame layer use magic wand tool to select outside of frame
In layers select bottom tube layer and hit delete
In layers select frame layer again
Open cobwebs, copy and close
Paste as new layer
Position bottom of frame
Add dropshadow
Open HocusPocus Tag, copy and close
Paste as new layer
Resize 40%
Postion bottom of canvas on spiderweb
Add dropshadow
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png


Fall Splendor

This tutorial was written on October 7, 2013
Any similarity to any other tutorial is purely coincidental

New Image 550x550 Transparent
Open Paper 14
Copy and close
Paste as new layer
Resize 550x550 (all layers unchecked)
Apply mask
Merge group
Open tube
Copy and close
Paste as new layer
Resize 70%
Add dropshadow
Open Element 14
Copy and close
Paste as new layer
Resize 60%
Position left side of tube
Duplicate - Mirror
Merge down
Add dropshadow
In layers select mask layer
Open Element 10
Copy and close
Paste as new layer
Resize 70%
Add dropshadow
In layers select lamps layer
Open Element 59
Copy and close
Paste as new layer
Resize 25%
position bottom of tube
Add dropshadow
Open Element 34
Copy and close
Paste as new layer
Resize 25%
Position left side of cloud
Duplicate - Mirror
Merge down
Add dropshadow
Add copyright and Lic #
Merge Visible
Add name desired
Save as .png