This tutorial was written by Alexandra on May 22, 2013

Any similarity to any other tutorial is purely coincidental.

I used PSP10 to write this tutorial.

PTU kit "Steampunk and Roses" by Naughty Angelz Creationz

You can check out her kits HERE

Tube is "Steampunk Pinocchio" by Charles R. Bristow

This is a three tube pack and can be purchased at Mystical Scraps

Template "Thanksgiving 5" by Amy Leah Gimptastic Tuts

Plugins: Xero Porcelain and Penta Dot and Cross

IL = In Layers

Dropshadow: V= -2 / H= 2 / Opacity 40 / Blur 3.00 / Color Black

Open tube and minimize

Open template and delete Credits layer

IL select rect 5

Select All - Float - Defloat

Open PP3

Copy - Close

Paste As New Layer

Invert Selection - Delete - Select None

Delete original template layer

IL select rect 4

Select All - Float - Defloat

Paste As New Layer

Invert Selection - Delete - Select None

Delete original template layer

IL select circle

Select All - Float - defloat

Open PP9

Copy - Close

Paste As New Layer

Invert Selection - Delete - Select None

Delete original template layer

IL select rect 3

Select All - Float - Defloat

Open PP2

Copy - Close

Paste As New Layer

Invert Selection - Delete - Select None

Delete original template layer

IL select frame 3

Add noise (Gaussian, Monochrome, 91% Noise)

IL select Rect 2

Select All - Float - Defloat

Paste As New Layer

Invert Selection - Delete - Select None

Delete original template

IL select frame 2

Add noise (same settings previously used)

IL select rect 1

Select All - Float - defloat

New Raster Layer

Flood fill #885549

Apply Penta - Dot and Cross (default settings)

Restore tube

Copy full size tube

Minimize

Paste As New Layer

Position in selection as desired

Invert selection - Delete - Select None

Add dropshadow

Add Xero - Porcelain (default settings)

IL select frame 1

Add noise (same settings previously used)

Open the following elements, resize, copy/paste, add dropshadow and arrange as desired:

El13 - 60%

El16 - 45% - 70%

El14 - 30% (I duplicated 3x)

El24 - 70%

El14 - 25%

El36 - 30% (I duplicated 3x)

El13 - 30% (I duplicated 1x)

El19 - 20% (I duplicated 1x)

Add Copyright and Lic#

Merge Visible

Add name desired

Save as .png

 

 

 

This tutorial was written by Alexandra on May 20,2013
Any similarity to any other tutorial is purely coincidental.


I used PSP10 to write this tutorial
Any version should work


PTU kit "Steampunk And Roses" by Naughty Angelz Creationz

Tube is a Verymany tube from PFD

Template 4 by Amy and Leahs Gimptastic tuts

IL= In Layers

Dropshadow: V= -2 / H= 2 / Opacity 40 / Blur 3.00 / Color Black


Open tube and minimize
Open template
IL delete credits and bg layers
IL select circle 3
Select All - Float - Defloat
Open pp10
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select circle 2
Select All - Float - Defloat
New Raster Layer
Flood fill color from tube (I used #db9761)
Select None
Apply VanDerLee Unplugged - Interlace (change only transparency to Screen)
Delete original template layer
IL select circle 1
Select All - Float - Defloat
New Raster Layer
Flood Fill (use same color used previously)
Select None
Apply VanDerLee Unplugged - Interlace (same settings used previously)
Delete original template layer
IL select square 3
Select All - Float - Defloat
Open pp2
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select frame 3
Select All - Float - Defloat
New Raster Layer
Flood fill color from tube (I used #6c3e2e)
IL select square 2
Select All - Float - Defloat
New Raster Layer
Flood fill same color used previously
Select None
Delete original template layer
IL select Raster 6
Select All - Float - Defloat
Restore tube
Copy Close up
Minimize tube canvas
Paste As New Layer
Arrange as desired within the selection
Invert Selection - Delete - Select None
Duplicate tube layer
Change blend mode on both layers to Screen
Apply Penta - Color Dot (default settings)
Merge top tube layer down 2x
Duplicate
Arrange top layer above square 1
Delete square 1

Delete the following layers:
Dreams back
Dreams
True back
True
Do come back
Do come

IL select frame 1
Restore tube
Copy - Full size
Close
Paste As New Layer
Resize 40%
position down slightly so hair is not outside of canvas
Add dropshadow
Erase bottom of tube outside of center square

Open the following items, resize, copy/paste and arrange as desired...don't forget dropshadows

El31 - 40% (Duplicated)
El6
El36 - 40% (Duplicated 3x)
El12 - 40% (Duplicated)
El14 - 40% (Duplicated)
El11 - 30% (Duplicated)

IL select Raster 7 (tube layer)
Open el10
Resize 30%
Copy - Close
Paste As New Layer
Postion top left corner of square and circle
Duplicate - Miror
Give each bow a dropshadow
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

This tutorial was written by Alexandra on May 19, 2013
Any similarity to any other tutorial is purely coincidental.


Tube "Demi" by Ninaste
You can purchase this tube at Scraps And The City

Scrapkit "Heather" by AmyMarie wich is an exclusive at Scraps And The City

Mask:  WSL_Mask221 by Weescotslass
IL= In Layers

Dropshadow: V= -2 / H= 2 / Opacity 40 / Blur 3.00 / Color Black

Open tube and minimize
New Canvas 600x600 Transparent
Select All
Open PP1
Copy - Close
Paste Into Selection
Select None
Apply Mask
Merge Group
Open 20
Resize 80%
Copy - Close
Paste As New Layer
Position slightly up and right
Using magic wand click in center of frame
Expand selection 2
Open PP7
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Arrange paper layer below frame layer
Restore tube
Copy - Minimize
Paste As New Layer
Arrange as desired
Invert Selection - Delete - Select None
Duplicate tube layer
On top tube layer:
Apply Xero - Radiance (default settings)
On bottom tube layer:
Apply Xero - Bad Dream (default settings)
Apply VanDerLee - Unplugged - Interlace (change ONLY Transperancy to Screen)
Merge both tube layers together
Change Blend Mode to Overlay
IL select Raster 1 (frame layer)
Add dropshadow
Restore tube
Copy - Close
Paste As New Layer
Resize 35%
Postion left side frame border
Add dropshadow
IL select Raster 1 (frame layer)
Open the following elements, resize, copy/paste and position as desired, adding dropshadows:

6 - 30% (duplicate)
10 - 30%
11 - No Resize
22 - 40%
39 - 40%
26 - 40%

IL select Raster 4 (top tube layer)

Open 86
Copy - Close
Paste As New Layer
Mirror
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

This tutorial was written by Alexandra on May 20, 2013
Any similarity to any other tutorial is purely coincidental.


I used PSP10 to write this tutorial.


PTU kit "Blueberry Lemonade" by Freeks Creations.
You can purchase this fantastic kit at Mysical Scraps
Tube is by Jose Cano (bought at MPT but now at SATC

Template 79 by Amy Leahs Gimptastic Tuts

IL = In Layers

Dropshadow: V= -2 / H= 2 / Opacity 40 / Blur 3.00 / Color Black


Open tube and minimize
Open template and delete credits layer
Open Paper10
Copy - Close
IL Delete 8, 7, 6
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 5
Select All - Float - Defloat
Open Paper9
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 4
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 3
Select All - Float - Defloat
Open Paper3
Copy - Close
New Raster Layer
Paste Into Selection
Select None
Delete original template layer
IL select 2
Select All - Float - Defloat
Open Paper6
Copy - Close
New Raster Layer
Paste Into Selection
Select None
Delete original template layer
IL select 1
Select All - Float - Defloat
Open Paper13
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select Raster 8
Using magic wand click in center of circle frame
Expand 2
Restore tube
Copy - Close
Paste As New Layer
Invert Selection
Erase bottom of tube outside of frame
Select None
Add dropshadow
IL select Raster 8
Open, resize, copy/paste, add dropshadow and position as desired the following elements

Flower - 20% / 25% (I duplicated 2x)
Flower4 - 25% / 80% (I duplicated 2x)
Butterfly - 25% / 25%

IL select tube layer
Open, resize, copy/paste, add dropshadow and postion as desired the following elements

Basket - 20% / 40%
Blue Berries - 10% / 70% (duplicated 1x)
Lemon Bunch - 10% (duplicated 1x)
Drink - 10% / 80%

Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

 

 

This tutorial was written by Alexandra 0n May 18, 2013
Any similarity to any other tutorial is purely coincidental.

I used PSP10 to write this tutorial.

PTU kit "Mae Jay Ice Cream Shoppe" by Wicked Princess Scraps

Tube "Cascade" by Barbara Jensen

Template & Wordart are a pkg from Amy Leahs Gimptastic Tuts

Plugins:




IL = In Layers

Drophshadow:  V= -2 / H= 2 / Opacity 40 / Blur 3.00 / Color Black


Open tube and minimize
Open Wordart, delete Credits layer and minimize
Open Template, delete credits layer
IL Select 11
Select All - Float - Defloat
Open PP7
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Select None
Delete original template layer
IL select 10
Select All - Float - Defloat
Open PP3
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 9
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 8
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 7
Select All - Float - Defloat
Open PP2
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 6
Select All - Float - Defloat
Open PP9
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 5
Select All - Float - Defloat
New Raster Layer
Flood fill #82d9d0
Select None
Delete original template layer
IL select 4
Select All - Float - Defloat
New Raster Layer
Flood fill #82d9d0
Select None
Delete original template layer
IL select 3
Select All - Float - Defloat
New Raster Layer
Flood Fill #663e1a
Select None
Apply Xero - Fritillary (7, 30, 100, 75)
Delete original template layer
IL select 2
Select All - Float - Defloat
Open PP1
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template Layer
IL select 1
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select Raster 11
Merge down 1x
Select All - Float Defloat
Restore tube
Copy - Minimize
Paste As New Layer
Arrange tube in left selection as desired
Invert Selection - Delete - Invert Selection
Paste As New Layer
Arrange tube in right selection as desired
Invert Selection - Delete - Invert Selection
Merge down 1x
Duplicate tube layer
On bottom layer
Apply Xero - Bad Dream (Default settings)
Change blend mode to Overlay
On top layer
Apply Xero - Radiance (Default Settings)
Change blend mode to Screen
Merge down 2x
Apply VanDerLee Unplugged - Interlace (Change Transparency to 32)
Select None
Restore tube
Copy - Paste
Mirror
Resize 60%
Add dropshadow
Erase tube outside of inside circle at the bottom of the canvas
Restore wordart
Resize 60%
Copy - Close
Paste As New Layer
Add dropshadow
Position wordart near bottom of canvas

Open the following elements, resize, copy/paste, add dropshadow and arrange as desired:

Flower 2 - 25%
Flower 5 - 15%
Cake Pops - 25%
Sundae 2 - 30%
Candy 4 - 25%
Ice Cream 3 -25%
Popcicle 3 - 25%

Add Copyright & Lic #
Merge Visible
Add name desired
Save as .png

 

 

This tutorial was written by Alexandra on May 8, 2012
Any similarity to any other tutorial is purely coincidental.

I used PSP10 to write this tutorial but any version should work.

PTU kit "Candy O" by Wicked Princess Scraps

Tube is by Very Many

Template 239 by Millies PSP Madness

IL = In Layers

Dropshadow: V= 0 / H= 0 / Opacity 70 / Blur 6.00 / Color Black


Open tube and minimize
Open template
Delete Raster 1, Shadow Raster 1, 7, 8 and 9
IL select 1 layer
Select All - Float - Defloat
Open Paper 6
copy - close
Paste as new layer
invert selection - delete - invert selection
Expand selection 4
new raster layer
Flood fill #fba0e5
Add noise (Gaussian, Monochrome, 92% Noise)
Select none
Arrange noise layer below paper layer
Delete original template layer
IL select 2 layer
Select all - float - defloat
Open Paper 5
Copy - close
Paste as new layer
invert selection - delete - invert selection
expand selection 4
New raster layer
flood fill #fba0e5
Add noise (same settings previously used)
Select none
arrange noise layer below paper layer
delete original template layer
IL select 3 layer
Select all - float - defloat
Open paper 4
Copy - close
paste as new layer
invert selection - delete - invert selection
expand selection 4
New raster layer
flood fill #fba0e5
add noise (same settings previously used)
select none
arrange noise layer below paper layer
delete original template layer
IL select 4 layer
Select all - float - defloat
new raster layer
Flood fill #d19ddb
apply Xero Fritillary (7/30/100/75)
Expand selection 4
New raster layer
flood fill #fba0e5
Add noise (same settings previously used)
select none
arrange noise layer below paper layer
delete original template layer
IL select 5 layer
Select all - float - defloat
Open paper 1
copy - close
Paste as new layer
invert selection - delete - invert
expand selection 4
new raster layer
flood fill #fba0e5
Add noise (same settings previously used)
select none
arrange noise layer below paper layer
delete original template layer
IL select 6 layer
Select all - float - defloat
Open paper 2
Copy - close
Paste as new layer
invert selection - delete - invert selection
expand selection 4
Flood fill #fba0e5
Contract selection 6
Delete
Select none
Delete original template layer
IL select Raster 12 (the pink frames you just made)
add noise (same settings previously used)
Using magic wand click inside of top frame
Holding down shift key clickin center of bottom frame
Now both frames should have marching ants around the insides
IL select Raster 11 (paper layer below the frames)
restore tube
mirror full size tube
Copy and minimize
Paste as New layer
Arrange in selections as desired
invert selection - delete - select none
Apply Xero Porcelain using default settings
Apply VanDerLee Unplugged - Interlace (all default settings but change Transparency to SCREEN)
IL select frame layer
Add dropshadow
Restore tube
IL select full size tube
Mirror
Copy and close
Paste as New layer
Resize 70%
postion left side of canvas
Add dropshadow
IL select tube layer
open and resize the following elements (or one's of your choice) and position on your tag as you desire.
Add dropshadows to each element

Cupcake 3 - 40%
Cherry - 30%
Peppermint - 25% (duplicated)
Milkshake - 40%
Candy Kiss - 30%
Candy 4 - 30%
BonBon1 - 25%
Butterfly - 25%

IL select background layer
open circle doodle
Copy - Close
Paste as new layer
position left side of canvas
Duplicate
position right side of canvas
merge down 1x
Add dropshadow
Merge visible
Resize 600x600 all layers checked
Add copyright and Lic#
Add name desired
Save as .png

 

 

This tutorial was written by Alexandra on May 12, 2013
Any similarity to any other tutorial is purely coincidental.

I used psp10 to write this tutorial but any version should work.


Kit is "Candy O" by Wicked Princess Scraps

Tube is a Roman Zaric Tube

Template used is 251 by Millies PSP Madness

IL = In Layers

Dropshadow: V= 0 / H= 0 / Opacity 82 / Blur 6.00 / Color Black


Open tube and minimize
Open template
IL delete Raster 1
IL select 1
Select All - Float - Defloat
Open PP5
Copy - close
Paste As New Layer
invert Selection - Delete - Select None
Delete original template layer
IL select 2
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 3
Select All - float - Defloat
Open PP3
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 4
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 5
Select All - Float - Defloat
Open PP1
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 6
Select All - Float - Defloat
Open PP2
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
IL select 7
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL delete 8, 9, 10, 11
IL select 12
Select All - float - Defloat
Expand selection 2
New Layer
Flood fill #bc2f73
Select none
Arrange layer below wordart layer
IL select 14
Merge down 2x
Select All - Float - Defloat
Expand selection 2
New Raster layer
Flood fill #bc2f73
arrange layer below wordart layer
IL select 12 (word art layer)
Merge down 1x
Add dropshadow
Position word art slightly down to bottom of canvas
IL select Raster 7
Restore tube
Copy - Close
Paste As New Layer
Resize 60%
Add dropshadow
IL select 7 (right rectangle)
Open the following elements, resize and paste onto canvas adding dropshadows to each and arrange as desired.

Flag 70%
Butterfly 30%
Sucker 2 30%
Sucker 4 30%

Resize 600x528 all layers checked
Add Copyright and Lic #
Merge Visible
Add name desired
Save as .png

 

 

This tutorial was written by Alexandra on May 12, 2013
Any similarity to any other tutorial is purely coincidental.

I used PSP10 to write this tutorial but any version should work.


Tube "Angeline" by Ninaste
You can purchase this tube at Scraps And The City

Kit "Angeline 2" by Tiny Turtle
You can purchase this kit at Scraps And The City


Template 242 by Millies PSP Madness

IL= In Layers

Dropshadow: V= 0 / H= 0 / Opacity 70 / Blur 6.00 / Color Black


Open tube and minimize
Open template
Delete Raster 1, 9 and 10 layers
IL select 1
Select All - Float - Defloat
Open 5
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 2
Select All - float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 3
Select All - Float - Defloat
Open 25
Copy - close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 4
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 5
Select All - Float - Defloat
Open 18
Copy - close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 6
Select All - Float - Defloat
Open 2
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 7
Select All - Float - Defloat
Open 33
Copy - close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL seelct 8
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 12
Select All - Float - Defloat
Open 26
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select 13
Open 79
Resize 70%
Copy - close
Paste As New Layer
Position bottom left corner of canvas
Duplicate - Mirror
Merge down 1x
Add dropshadow
Open 50
Resize 70%
Copy - Close
Paste As New layer
position top left corner of left square
Add dropshadow
Open 8
Resize 10%
Copy - Close
Paste As New Layer
Add dropshadow
Posiiton top of charm over center of ribbon bow
Open 103
Resize 40%
Copy - Close
Paste As New Layer
Add dropshadow
Position right side of canvas
Open 105
Resize 30%
Copy - Close
Paste As New Layer
Add dropshadow
Position front right of vase
Open 99
Resize 40%
Copy - Close
Paste As New Layer
Position left side of canvas
Add dropshadow
Open 96
Resize 25%
Copy - Close
Paste As New Layer
Add dropshadow
Position left side of violin
Open 57
Resize 25%
Copy - Close
Paste As New Layer
Free Rotate right 22
Position top right corner of canvas
Add dropshadow
Restore tube
Copy - Close
Paste As New Layer
Resize 70%
Add dropshadow
Merge Visible
Resize 600x505 all layers checked
Add copyright and Lic #
Add name desired
Save as .png

 

 

This tutorial was written by Alexandra on May 11, 2013
Any similarity to any other tutorial is purely coincidental.

I used PSP10 to write this tutorial but any version should work


Tube "Angeline" by Ninaste at Scraps And The City

Scrapkit "Angeline 1" by Tiny Turtle at Scraps And The City


Template 188 by Toxic Dezires


IL = In Layers

Dropshadow: V= 0 / H= 0 / Opacity 70 / Blur 6.00 / Color Black


Open tube and minimize
Open template
IL delete Credits layer
IL Select Raster 8
Select All - Float - Defloat
Open 15
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand Selection 4
New Raster Layer
Flood Fill white
Add Noise (Gaussian, Monochrome, 91% Noise)
Select None
Arrange Noise layer below paper layer
Delete original template layer
IL select Copy of Raster 8
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand selection 4
New Raster Layer
Flood fill white
Add noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Raster 7
Select All - Float - Defloat
Open 6
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
New Raster Layer
Flood fill white
Add noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Copy of Raster 7
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand 4
New Raster Layer
Flood Fill white
Add noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Raster 6
Select All - Float - Defloat
Open 17
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand Selection 4
New Raster Layer
Flood Fill white
Add noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Copy of Raster 6
Select All - Float - Defloat
Paste As  New Layer
Invert Selection - Delete - Invert Selection
Expand Selection 4
New Raster Layer
Flood fill white
Add noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Raster 5
Select All - Float - Defloat
Open 1
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand selection 4
New Raster Layer
Flood fill white
Add Noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Copy of Raster 5
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand selection 4
New Raster Layer
Floodfill white
Add Noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Raster 4
Select All - Float - Defloat
Open 18
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand selection 4
New Raster Layer
Flood fill white
Add Noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Raster 9
Select All - Float - Defloat
Open 7
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand selection 4
New Raster Layer
Flood fill white
Add Noise (same settings previously used)
Select None
Arrange noise layer below paper layer
Delete original template layer
IL select Copy of Raster 1
Select All - Float - Defloat
Open 32
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
IL select top layer
Restore tube
Copy - Close
Paste As New Layer
Resize 80%
Add dropshadow
Close tube layer out
IL select Raster 9 (Large red circle)
Open the following elements, resize and add to canvas. Position as desired. Add dropshadows.

146
59 - 60% Duplicated
1 - 40%
6 - 30% Duplicated
99 - 30% Duplicated

Merge Visible
Resize 600x520 all layers checked
Add Copyright and Lic #
Add Name
Save as .png

 

 

This tutorial was written by Alexandra on May 8, 2013
Any similarity to any other tutorial is purely coincidental

I used PSP10 to write this tutorial but any version should work


PTU kit "Summer Fun" by Fiona Devil Creations


Tube by Alex Prihodko

Template 253 by Millies PSP Madness

*Tramages - Tow The Line

*Penta.com - Color Dot

IL = In Layers

Dropshadow: V= 0 / H= 0 / Opacity 93 / Blur 5.00 / Color Black


Open tube and minimize
Open template
Delete Raster 1
IL select 1
Select All - Float - Defloat
New Raster Layer
Flood Fill color from tube (I used #f9cf89)
Apply Tramages - Tow The Line (default settings)
Select None
Delete original template later
IL select 2 layer
Select All - Float - Defloat
Open Paper 3
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
Expand selection 3
New Raster Layer
Flood fill #f9cf89
Add noise (Gaussian, monochrome, 92% Noise)
Arrange noise layer below paper layer
Select None
Delete original template layer
IL select 3
Select All - Float - Defloat
New Raster Layer
Flood fill #b3c62e
Apply Penta.com - Color Dot (default settings)
Expand selection 3
New Raster Layer
Flood fill #f9cf89
Add noise (same settings used previously)
Arrange noise layer below dotted layer
Select None
Delete original template layer
IL select 4 layer
Select All - Float - Defloat
Open Paper 1
Copy - Close
Paste As New Layer
Invert Selection - Delete - Invert Selection
New Raster Layer
Flood fill #f9cf89
Add noise (same settings used previously)
Arrange noise layer below paper layer
Select None
Delete original template layer
IL select 5 layer
Select All - Float - Defloat
New Raster Layer
Flood fill #fcf276
Apply Penta.com - Color Dot (same settings used previously)
Expand selection 3
New Raster Layer
Flood fill #f9cf89
Add noise (same settings used previously)
Select none
Arrange noise layer below dotted layer
Delete original template layer and delete all wordart layers
IL select top circle layer
Open, resize, copy & Paste the following elements adding dropshadows to each one.

Cluster yellow - 70%
Leaf Stem - 40% - Duplicate - Mirror
Vines - 60% - Duplicate - Mirror
FrangipaniBundle - 60% - Duplicate - Mirror
Butterfly 3 - 30% - Rotate right 30%
Butterfly 2 - 30% - Rotate left 22%

Restore tube
Resize 35%
Copy - Close
Paste As new Layer
Add dropshadow
Open yellowRibbon
Resize 30%
Copy - Close
Paste As New Layer
Position botom of tube
IL select word art layer
Select All - Float - Defloat
New Raster Layer
Flood fill #568460
Expand selection 2
New Raster Layer
Flood fill #f8ce88
Select None
add dropshadow
Delete original template layer
Resize 600x534 all layers checked
Add copyright and Lic#
Merge visible
Add name desired
Save as .png

 

 

This tutorial was written by Alexandra on May 5, 2013
Any similarity to any other tutorial is purely coincidental

I used psp 10 to write this tutorial but any version will work.


PTU kit "Pink Fling" by Fiona Devil Creations
You can check out her kits on her blog

Tube is a Barbara Jensen tube

Template is a Alisha/Tina Collab from Creative Misfits Creations

IL: In Layers

Dropshadow: V= 0 / H= 0 / Opacity 75 / Blur 5.00 / Color Black



Lets begin shall we?

Open tube and minimize
Open template
IL delete Credits and Wordart
Position PLEASE wordart down slight near the bottom of your canvas
IL select SquareLeft layer
Select All - Float - Defloat
Open Paper14
Copy - Close
Paste As New Layer
Invert selection - Delete - Select None
Delete original template layer
IL select squareRight
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select PinkCircleLeft
Select All - Float - Defloat
Open Paper12
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select PinkCircleRight
Select All - Float - Defloat
Paste As New Layer
Invert Selection - Delete - Select None
Delete original template layer
IL select BigPinkCircle
Select All - Float - Defloat
Open Paper13
Copy - Close
Paste As New Layer
Invert Selection - delete - select none
Delete original template layer
IL select CircleLeft
Select All - Float - Defloat
Open Paper9
Copy - Close
Paste As New Layer
Invert selection - Delete - Select None
Delete original template layer
IL select CircleRight
Select All - Float - Defloat
Paste As New Layer
Invert selection - Delete - Select None
Delete original template layer
IL select PinkSquare
Select All - Float - Defloat
Open Paper3
Copy - Close
Paste As New Layer
Invert Selection - Delete - select none
Delete original template layer
IL select Raster 8
Restore tube
Copy - Minimize
Paste As New Layer
Resize 70%
position so bottom of tube is even with bottom of square
Add dropshadow
IL select Raster 8 again
Open the following elements, resize and place as desired..don't forget dropshadows!

El01 - 40% (duplicate if desired)
El12 - 40%
El17 - 40%
El25 - 60%

IL select Raster 7
Open Ele18
Copy - Close
Paste As New Layer
Open El36
Resize 25%
Duplicate 3 or 4 times and arrange each around the canvas as desired
Merge flower layers together
Add dropshadow
Open Ele07
Copy - Close
Paste As New Layer
Add dropshadow
IL select Background layer (it's closed off - Leave closed)
Open El35
copy - Close
Paste As New Layer
postion top left corner
Duplicate
Position bottom right corner
Delete Background layer
IL select PLEASE Wordart layer
Select All - Float - defloat
Expand selection 3
New Raster Layer
Floodfill White
Add Noise (Gaussian, Monochrome, 87% Noise)
Select None
Arrange glitter layer below black wordart
Add dropshadow
Merge Visible
Resize 600x514 all layers checked
Add Copyright and Lic#
Merge Visible
Add name
Save as .png

 

 

This tutorial was written by Alexandra on May 3, 2013
Any similarity to any other tutorial is purely coincidental.

I used PSP10 to write this tutorial but any version should work.

PTU scrapkit "Summer In Disguise" by Artlor Designs
You can purchase this kit at Country Corner Creations

Tube is by Barbara Jensen

Mask: DBV Mask 28 by Designs By Vaybs


IL = In Layers

Dropshadow: V= 0 / H= 0 / Opacity 75 / Blur 5.00 / Color Black


Open tube and minimize
New 600x600
Select all
Open Paper11
Copy - Close
Paste Into Selection
Select None
Apply mask
Merge group
Open Frame2
Resize 70%
Copy - Close
Paste As New Layer
Using magic wand click in center of frame
Expand selection 3
Open Paper13
Copy - Close
Paste As New Layer
Invert Selection - Delete - Select None
arrange paper layer below frame layer
Restore tube
Resize 80%
Copy - Close
Paste as New layer
Add dropshadow
Erase any tube outside of the bottom inside edge of the frame
Open Flower1
Resize 25%
Copy - Close
Paste as new layer
Position bottom of frame on the bottom left edge of the tube
Add dropshadow
Open Flower3
Resize 25%
Copy - Close
Paste As New Layer
Postion right side of pink flower
Add dropshadow
IL select Raster 4 (pink flower)
Duplicate - Mirror
Add dropshadow
Open Tag4
Resize 25%
Copy - Close
Paste As New Layer
Position bottom right corner
Add dropshadow
IL select Raster 1 (Frame)
Open Bow3
Resize 25%
Copy - Close
Paste As New Layer
Position top right edge of frame
Add dropshadow
Open Butterfly2
resize 25%
Copy - Close
Paste As New Layer
Position top left corner
Angle 45% right
Add dropshadow
Add copyright and Lic #
Merge visible
Add name on tag
Save as .png